Comparing Imagery in Frosts Acquainted with the Night and Sexton s He

Imagery in Frost's Acquainted with the Night and Sexton 's Her Kind In order to maximize meaning and overall total effect of a piece of work, writers use various literary devices. These techniques enhance the author's work and add a dimension that results in higher reader satisfaction. Throughout the poems I have read this quarter thus far, I have discovered the use of imagery as a prominent source of literary embellishment. In particular the image of night is used in poems "Acquainted with the Night," written by Robert Frost, and "Her Kind," written by Anne Sexton, to portray a dark and lonely tone. All through both poems there is a dark feeling due to word selection and associations to evil things. The use of night in both cases helps to solidify the idea of loneliness. Each poem puts to work the same image to create the same affect but each work has slight differences and similarities in the way it makes night apply to loneliness. Imagery can be presented in many different ways. A strong image of night exists all over Robert Frost's piece, "Acquainted with the Night," due to a very descriptive representation of things that happen or belong to the night. By simply describing the details of night Frost can paint a picture of a lonely man. The key to using imagery is to choose images that have very distinct characteristics that associate themselves with that image. Frost's idea of choosing night to portray a sense of being alone is due to the connections of cold, dark, wet and unknowns that go along with the night. The same affect would not be able to be created if the ... ...unt the night with power. Through the use of imagery the writer is able to apply several different meanings by using one simple image. This makes the poems overall affect more efficient in making its point. The composition has become less wordy and is able to make a vivid scene with out the need of extensive descriptions. Examining the differences and similarities of the two different applications of night as an image of loneliness, is a good way to determine what the overall feel of the poem is. When reading these works one must take the existing mold of an image and see if there are any dual meanings of why the author chose that particular concept. The use of an image as a literary devise allows the piece to touch its readers on a more personal level.

Home / Identity Essay -- science

Home / Identity The word ‘home’ is something that is often misunderstood. Home makes up your identity and not many people know that. Therefore you ask me, ‘what is home?’ Home is not just in your house. Home is a place that surrounds you. It’s you environment and cause for emotions. Your home is where you are with the people that surround you (peers, family, and strangers), as well as cars, houses, stores, and/or toys. All of these things (people, buildings, playful objects, and nature) are the components that make up a home. Some people don’t have all of those things in their home though. A homeless man has no house to live in whereas a rich man has a beautiful house to his or her accommodations as well as anything that will make him or her happy. This also explains the question, ‘where is home?’ Home has no exact place to be. Your home can be on the opposite side of someone else's home. You can even share the same home with family members that live with you, even though they see it different than you. That is because you don’t share the same emotions. Emotions are expressed differently through each person because of their life experiences. A young child could be laughed at at school, while their brother or sister(s) isn’t laughed at. The result for that is that they could live in the same home, but be different people in their personalities. The word ‘personalities’ is often mixed up with the word ‘identity.’ The way a person is treated affects their personalit...

Regulation and Accreditation Essay -- Health Care, Nursing

Regulatory and accreditation agencies have participated in the nursing community for several years. Regulation in healthcare started as a registry process to protect patients and healthcare givers. Currently, regulation serves the purpose of protecting patients. It also helps in defining healthcare practices and nursing education. In order to understand the function of regulatory and accrediting agencies and practices one must understand their definitions (McWay, 2003). A regulatory agency has the responsibility of creating and enforcing rules or regulations of the law. Accreditation is a voluntary and self-regulatory process that non-governmental associations recognize programs put in place to meet or extend standards of quality healthcare. Accreditation also helps in the improvements of institutions or programs related to the use of resources, application of processes and achievement of results (Lundy & Janes, 2009). There are several regulatory and accreditation standards that exist in the case study. First, preventable measures have been used as a regulatory standard. For instance, professionals have increased malpractice lawsuits after falls. Patients and their families institute these lawsuits to suggest that better care would have prevented the fall and injuries. Malpractice suits serve as a preventive measure. They are used to prevent many patient falls from occurring. The jury awards for the perceived unnecessary complications. The methodological explanation of malpractice suits is that fall prevention is a nursing assessment issue (Miller, 2006). Secondly, healthcare organizations have developed preventive measures used for the prevention of patient falls. For example, healthcare agencies now collect data and use th... ... safety interventions. Therefore, no agency can successfully adopt potential improvements without cost-effectiveness. This calls for applying cost-effective changes before applying regulatory and accreditation standards. In conclusion, this case study shows that regulatory and accreditation standards exist. There are strategies that help in meeting these standards. However, the strategies do not function adequately to ensure that the standards are met because of several gaps that exist in practice. Therefore, regulatory and accreditation agencies should work closely with hospitals and other healthcare agencies, to close those gaps and develop a cost effective and appropriate way of meeting regulatory and accreditation standards. This will help healthcare agencies to provide adequate safety and care, for patients (Folland, Goodman, & Stano, 2007).

Stomata Density

Stomata are tiny pores found on the epidermis of the leaf, surrounded by guard cells. [1] Their main function is gas exchange [1] for photosynthesis and respiration. The development of stomata on the leaves of a plant is determined by interaction between different genes and environmental factors. A few studies have been conducted in order to establish a relationship between stomatal densities and given environmental factors. Research has shown that stomatal densities are controlled by environmental conditions during leaf development, but are fixed after the leaf matures. [2]The article â€Å"The influence of light on stomatal density of a tomato† by A. P. Gay and R. G. Hurd describes their findings that plants grown under high light intensity have more stomata per 1 mm 2 than plants grown under low light intensity. [3] The purpose of my investigation is to determine whether there is a correlation between the light intensity and the stomatal density on lavender leaves and wheth er the initial height of the plants influences the stomatal densities. The hypothesis is that an increase in the light intensity will lead to an increase in the stomatal density of the lavender leaf.The first aim of this investigation was to find whether there is a significant correlation between the stomatal density of lavender plants and the light intensity under which they are grown. The second aim of the investigation was to find out whether the initial height of the plant influences its stomatal density. Cuttings were taken from lavender plants to ensure that all the plants were genetically identical and that the only changes occurring in the stomatal density would be due to environmental conditions. Four cuttings were short (3 cm initial height) and four were tall (6 cm initial height).The cuttings were put under compact fluorescent light bulbs with four different power ratings (8, 11, 14, and 20 W). One short and one tall cutting were put under each of the four light bulbs fo r 28 days in order to grow them. Both the short and the tall plants showed a positive correlation between their stomatal densities and the light intensity. The correlation was statistically significant at a 0. 025 significance level according to the Pearson product-moment correlation test.The short and the tall plants grown under the same light intensity did not show any  statistically significant difference between their stomatal densities. The first aim of this investigation was to find whether there is a significant correlation between the stomatal density of lavender plants and the light intensity under which they are grown. The second aim of the investigation was to find out whether the initial height of the plant influences its stomatal density. Cuttings were taken from lavender plants to ensure that all the plants were genetically identical and that the only changes occurring in the stomatal density would be due to environmental conditions.Four cuttings were short (3 cm ini tial height) and four were tall (6 cm initial height). The cuttings were put under compact fluorescent light bulbs with four different power ratings (8, 11, 14, and 20 W). One short and one tall cutting were put under each of the four light bulbs for 28 days in order to grow them. Both the short and the tall plants showed a positive correlation between their stomatal densities and the light intensity. The correlation was statistically significant at a 0. 025 significance level according to the Pearson product-moment correlation test.The short and the tall plants grown under the same light intensity did not show any statistically significant difference between their stomatal densities. When trying to explain the correlation, it is important to consider what stomata are in the first place and what their most important functions are. Stomata are tiny pores [1] found on the epidermis of the plants and their main role is gas exchange between the leaf and the environment. Although stomata l development is essentially controlled by different genes, the environment also has a significant effect on stomatal development.Using plants that are clones in the investigation means that they all have the same genetic material and any changes in stomatal density on their leaves should be due to environmental factors. [9] Both light intensity and carbon dioxide concentration have been shown to influence the frequency at which stomata develop on the leaves of plants. [8] Plants can respond to changes in environmental conditions by changing their stomatal frequency. Recent research has shown that signals from older leaves can influence the development of stomata on the younger leaves.In that way, if the environmental conditions to which the older leaves are exposed change, then the younger leaves can increase or decrease their stomatal density; this physiological adaptation can help the plant cope with the changing environment. Why is the increased light intensity leading to increa sed stomatal density? Photosynthesis is the process by which plants synthesize glucose from carbon dioxide and water. The energy of the reaction is supplied by the sunlight. However, there are two main stages in photosynthesis – light-dependent and light-independent stages.The light-dependent stage depends on the light because the energy from the light is used to split water in the process of photolysis and excite electrons in the chlorophyll. [11] The products from the light-dependent stage are ATP and the electron acceptor – reduced NADP. [11] The products from the light-dependent stage are fed into the light-independent stage of photosynthesis, the Calvin cycle. [11] Carbon dioxide is fixed in the light-independent stage and converted to glucose; in the Calvin cycle, the products of the light-dependent stage are needed. So, more ATP and reduced NADP will result in an increased rate of carbon fixation.If the rate of carbon fixation increases, the rate at which carbon dioxide diffuses in and out of the leaf will increase. The light intensity is simply the energy per second per unit area carried by the incident light and it is proportional to the number of photons per second carried by the incident light. [12] Higher light intensity means more photons per second resulting in more electrons per second that would be excited during the light-dependent stage of photosynthesis, and more ATP and reduced NADP are produced. Therefore, increasing the light intensity will increase the overall rate of photosynthesis.The rate of gas exchange will increase as a result. Coming back to the main function of the stomata, increasing the rate of gas exchange may lead to increased stomatal density on the epidermis of the leaf. The adaptation leads to higher carbon dioxide assimilation as the results of recent studies have shown. [2] However, the energy of the incident light arriving per second is also proportional to the wavelength of the light. Therefore, the light intensity depends on the light wavelength. Plants have combinations of chlorophyll pigments [11] that absorb sunlight from the visible spectrum.The light of wavelengths 400-500 nm and 650-700 nm [11] is absorbed the most. These are blue and red light, respectively. Lavender grows well under compact fluorescent light bulbs. [13] By placing colored filters in front of the light bulbs, it can be established which color of light is most suitable for growing lavender and whether the color of light affects the stomatal density. To determine whether there is a statistically significant difference between the stomatal densities on the tall and short plants grown under the same light intensity, the Mann-Whitney U test is used.The null hypothesis is that there is no statistically significant difference between the stomatal densities of the tall and the short plants grown under the same light intensity. The null hypothesis may be rejected if the calculated value of U is equal to or smaller th an the critical value. The critical value for U for 10 sets of data is 16. [7] Looking back at the results section, all the calculated values of U are bigger than the critical value, so the null hypothesis is accepted. The initial height did not seem to influence the stomatal development in my investigation.

Sociology and Economic Prosperity

MULTI TOPIC strive 1. affectionate problems in our companionship and crimes in our society. 2. Corruption. 3. Social evils. 4. Nepotism. 5. Smuggling. 6. Over population. 7. Population and p overty. 8. Inflation. 9. Dearness. 10. medicate. 11. Sectarianism. 12. Social and sparingal problems of Pakistan. 13. Economic crises. 14. Mass illiteracy. 15. Beggary. 16. Drug addiction. 17. Bribery. 18. Dowry. 19. Violence. 20. Despair. 21. Depression. 22. Black marketing. 23. Social and sparing crises. 24. Indiscipline. 25. Hoarding. 26. Hypocrisy. 27. Injustice. 28. passage side robbery. 29. Provincialism. 30. Religious violence. 1. Ethic violence. 32. drop of tolerance. 33. Dis unity. 34. Black biting. 35. Un employment. 36. Terrorism. 37. disintegration. 38. Violation of fundamental rights. 39. feudal system or Feudal Repute. 40. Capitalism. 41. Flattery. 42. Health problems. 43. exemption of press. 44. Tax exclusion. 45. In sufficient checkup facilities. 46. Crushing border of foreign debt. 47. The bareness of currency. 48. Electricity crises. 49. Inflation. 50. Mass illiteracy. OUTLINE. 1. Introduction. 2. The evil impacts and hint of __________. 3. It breeds a lot of social, economic, political and example problems. . Causes of the _____________. 5. Remedies. 6. Conclusion. __________ has become one of the most embarrass (tension) and explosive problem all over the world especially in the third gear world countries wish well Pakistan. It is full of dangers of deva terra firma dimensions, evil impact, implication of grave and cogent magnitude. ___________ creates instability and demoralization in our rural area and in a back frame it breeds degradeion and frustration in our society and state. It creates and fiestas the feelings of uncertainly and insecurity among the fortunees. If ________creeps in a society.Read alikeSociology and Social Integration.It chow chow into its vitals and soon corrodes its inner strength, outer(a) splendour, eco nomic prosperity, social peace and content unity. Consequently, a nation good part is spoiled all over the world. Lawlessness becomes order of the day indiscipline due to poverty, corruption, violence, indiscipline and large number illiteracy. It creates conflict and oppositeness. It is non efficiently and properly and checked the intact indicial Marla and economic fabric of nation is pen up and collapsed. __________ is highly detriment and devastating for a country like Pakistan that has fragile economic and political instability.If the evil of _________ is not nipped in the bud it whitethorn spread promptly like a bush fire, and may engulf the whole nation or region like an epidemic. __________ has badly tattered the structure of the country. It causes a severe drift to the law of country and supremacy of the make-up is shattered by it. It deprives mass of mental, physical, spiritual, moral and economic prosperity and causes grave extend tos for bailiwick unity and t erritorial integrity ________ also paves way for bloody regulations and military puzzle over.So every peace loving somebody who fervently longs and cherished dreams for peace, prosperity and surety must ponder upon causes of social doctor of _________. The main causes of _______ are mass illiteracy, poverty, do by economic policies of the government, peoples unsatiable desire to accumulate countless riches and blind multiplication of worldly whishes. _________ creates irresistible, economic pressure on social and economic justice and gulfs have been increased in the midst of the lower and upper class.In a nutshell, mass illiteracy, temptation for ostentation of wealth, lust for power, luxury and comfort are the main causes of ________. Social, religious, linguistic differences also breed conflict and confrontation bias and hatred among the people who in back flesh grow and spread ________. Secondly feudalism, capitalism and unequal dissemination of opportunities, un-availab ility of fundamental rights and liberties spread __________. Thirdly the non-availability of grassroots necessities and facilities also paves the way to spread _______ in a society or state.External factors like agents or agencies of hostile neighboring state like India and Russia also play a extol role in ventilation ________ in the land of our country in order to destabilize the state and depress the people. It should be the basic and paramount concern of the men at the helm of our personal business as well as the scholars, educationists, semipolitical parties, NGOs and national mass media to take necessary steps at their levels for the eradication of growing penance of _________ in the best national and human inters.

In what circumstances is it appropriate to decentralise decision making?

Decentralisation of decision making is the process of involving different people in an organization in making key significant changes whether these changes are policy based or otherwise, different levels of senior management are involved and their expertise and own opinion is sought before any changes are enacted. There are 2 public key decisions making methods in an organisation, namely centralized and decentralized, In the latter, only the top management is involved in making key changes and decisions which negative affect the whole organization.This system is advantageous in that, it is faster, reliable wired and less tasking. While it is still used in great majority of organizaions, most organizations are shifting to the decentralised scientific method and therefore are involving different levels of management in the important decision making process.They rely to make decisions and provide same direction for the company.Thirdly, decentralised decision making process is ideal whereby, primary key decisions are being made at departmental levels such as in production department. Empowering departmental heads to make key decisions perhaps pertaining to the purchasing of crucial dry ingredients as well as other technical areas late may require a decentralised decision making model. PAGE 2: Organisational culture empty can present difficulties for management initiated change programmes? connect Discuss Organisational culture refers to the employee – employer international relations which shape how the two parties interact and intermingle at the work place.Also, organisational culture can be shaped by, former employee backgrounds, external factors as well as the level of support accorded to the employees by the political organization staff.Each time a one-voice coverage is required, e.

On the other hand an organization culture which is negative leads to new customers shunning away so that, any well meant educational programmes will be fail to take better off since, negative publicity which the employees can advance in the process of interacting with the different stake holders also what does have a bearing on the outcome of the projects. Lastly, organizational culture determines total output in workers in that, a negative general attitude amongst employees is more likely to lead to new low output in that, it is highly correlated with time low morale and therefore productivity.PAGE 3: Discuss why managerial authority is so important to our understanding of organisations and technological how this power has to be legitimised logical not just by individual workers but by the international organisations culture. Failure to appreciate managerial authority stems original form a negative culture which in stead of pestering a mutual understanding between skilled work ers and employers causes tensions and such misunderstandings in an organization.in fiscal reporting, agility early may not be suitable.To achieve the above, management should work towards having logical and inculcating in the organization, the right culture. This best can be achieved (if it is lacking), through the launching of strategic plans which could incorporate vision logical and mission statements, core values of the organization as well as the social responsibility statement of the organization. All the above are necessary in ensuring that, the organization functions in the right environment whereby the special needs of all members in the organization are taken great care of and employees feel free and as a part of the organization. This in turn direct result into a culture of unity and strength.Dynamic changes in financial resources and organisational objectives , along with the firm environment, geometric mean a static structure is suitable.

The classical organisation is linked with bureaucracy.Organizations and other people having different opinions on a particular small business choice best can struggle.The operation of the HR professional needs to close parallel the requirements of their organization that is shifting.In the procedure, you ought to be going for foreseeable future growth and ensuring.

Further empirical analysis is necessary Considering that the little effect of management reforms like these may take first time to unfold.There are six significant elements that moral ought to be aligned by the communication departments as a means.Gathering information could possibly be a issue for little logical and midsize businesses (SMEs), not just for financial or personnel reasons, but also because SMEs armed might not understand what theyd like to find worn out or they dont have sufficient time good for detailed analysis.Folks at every level in the business could have some autonomy.